XPL-C Series
- 外部测量范围：1.0~190/290mm（取决于型号）
- 内部测量范围：2.5~200/300mm（取决于型号）
- 最大测量长度：100mm 或 200mm（取决于型号）
- 最小螺距：0.1mm
- 重量：620kg
- 花岗岩床身
- 水平/垂直导轨：精密气浮轴承
- 驱动类型：瑞士无刷电机
- 测量系统：海德汉增量式直线光栅尺
- 分辨率：0.01μm
- 接口盒（含电缆）
- Click'On 快速更换系统
- 工业控制计算机
- 键盘、鼠标、纯平显示器
- 所购标准校准证书
- 机床轴激光校准证书
- MSProg LINUX 软件包（多语言）
- IACLIB，标准公差库
- 客户验收后保修 1 年
- 1 年免费更新MSProg 和购买的模块
Masterscanner XPL-C Series Full-automated measurement, without human intervention, the machine displays all measured thread parameters per pitch in under 2 minutes. All measured values are compared with the built-in thread standards library, the system generates the measuring report automatically. The MasterScanner significantly reduces human error, as well as improves the measuring efficiency, quality, consistency and accuracy of the results. The MasterScanner is compliant with all requirements
for tractability of today as stated in ISO-9000 and ISO/IEC 17025:2017.
Get all parameters of cylindrical thread plug gauges, cylindrical thread ring gauges, taper thread plug gauges, taper thread ring gauges, plain ring gauges, plain plug gauges and other gauges with internal & external dimensions, including virtual pitch diameter , single pitch diameter, basic pitch diameter, major diameter, minor diameter, thread pitch, thread angle, half of thread angle, flank straightness, lead angle, taper, perpendicularity, etc.
| MEASURING UNCERTAINTY: | ||
|---|---|---|
| XPL-C MODELS | XPL-C-200 | XPL-C-300 |
| Thread ring gauges, parallel or tapered (minor diameter > 10mm, partial flank angles ≥ 27º) | ||
| Minor diameter | 3,0 μm + 5.10-6·ι | 3,0 μm + 5.10-6·ι |
| Effective pitch diameter | 3,0 μm + 5.10-6·ι | 3,0 μm + 5.10-6·ι |
| Thread pitch | 1,0 μm + 5.10-6·ι | 1,0 μm + 5.10-6·ι |
| Flankangles (right and left side) | 0°6’0” | 0°6’0” |
| Taper | 0,1° | 0,1° |
| Thread ring gauges, parallel or tapered (minor diameter 2,5 to 10 mm, partial flank angles ≥ 27º) | ||
| Minor diameter | 3,5 μm + 5.10-6·ι | 3,5 μm + 5.10-6·ι |
| Effective pitch diameter | 3,5 μm + 5.10-6·ι | 3,5 μm + 5.10-6·ι |
| Thread pitch | 1,0 μm + 5.10-6·ι | 1,0 μm + 5.10-6·ι |
| Flankangles (right and left side) | 0°6’0” | 0°6’0” |
| Taper | 0,1° | 0,1° |
| Thread plug gauges, parallel or tapered (major diameter > 1 mm, partial flank angles ≥ 27º) | ||
| Minor diameter | 3,0 μm + 5.10-6·ι | 3,0 μm + 5.10-6·ι |
| Effective pitch diameter | 3,0 μm + 5.10-6·ι | 3,0 μm + 5.10-6·ι |
| Thread pitch | 1,0 μm + 5.10-6·ι | 1,0 μm + 5.10-6·ι |
| Flankangles (right and left side) | 0°6’0” | 0°6’0” |
| Taper | 0,1° | 0,1° |
| Plain gauges, parallel or tapered (Diameter > 10 mm) | ||
| Plain ring gauge | 2,0 μm + 5.10-6·ι | 2,0 μm + 5.10-6·ι |
| Plain plug gauge | 2,0 μm + 5.10-6·ι | 2,0 μm + 5.10-6·ι |
| Taper | 0,1° | 0,1° |
| Plain cylindrical or Taper gauge (Diameter from 1mm to 10mm) | ||
| Plain ring gauge | 3,0 μm + 5.10-6·ι | 3,0 μm + 5.10-6·ι |
| Plain plug gauge | 3,0 μm + 5.10-6·ι | 3,0 μm + 5.10-6·ι |
| Taper | 0,1° | 0,1° |